If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi Guys,
Setting up a FS 536SD and the tray holder advanced up to far and is hitting the cover. Is there a way to make it go back down before I power up again? I know I have run into this before years ago but I cant remember what to do. I think it happened because the tray was not on when the finisher was setting itself up. Thought about taping down the sensors on the top and restarting. Just wanted some input before I try that.
Thanks
You gotta open the finisher door, hold up the actuators and close finisher door and the tray will think it's fill and it will lower.
The other was is remove rear cover and depress the spring clutch gear so it Lowers the tray, that should be done with machine off .
We know a thing or two because we've seen a thing or two.
The medication helps though...
You gotta open the finisher door, hold up the actuators and close finisher door and the tray will think it's fill and it will lower.
The other was is remove rear cover and depress the spring clutch gear so it Lowers the tray, that should be done with machine off .
I just remove the rear cover and turn the pulley that lowers & lifts the belt for tray
This is the way I would have told you.
Originally posted by Synthohol
You gotta open the finisher door, hold up the actuators and close finisher door and the tray will think it's fill and it will lower.
The other was is remove rear cover and depress the spring clutch gear so it Lowers the tray, that should be done with machine off .
I used to use this one when shipping out finishers for delivery. It has to be lowered some to unscrew the tray. Our delivery guys were not always very delicate with the finishers (I don't mean you, Thayer). =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Hi Guys,
Setting up a FS 536SD and the tray holder advanced up to far and is hitting the cover. Is there a way to make it go back down before I power up again? I know I have run into this before years ago but I cant remember what to do. I think it happened because the tray was not on when the finisher was setting itself up. Thought about taping down the sensors on the top and restarting. Just wanted some input before I try that.
Thanks
You can do it too in service mode,finisher settings, test , main tray up/down
When the upper limit switch is activated I have never had a response in service mode for lowering the tray, the error code usually cancels the ability.
Ymmv good luck
We know a thing or two because we've seen a thing or two.
The medication helps though...
A favorite resort of the foreign residents of Yokohama during the summer months is the island of Enoshima. It is about twenty miles away, and is a noted place of pilgrimage for the Japanese, on account of certain shrines that are reputed to have a sacred character. Doctor Bronson arranged that his party should pay a visit to this island, as it was an interesting spot, and they could have a glimpse of Japanese life in the rural districts, and among the fishermen of the coast. "But as we are in for it," he continued, "we must make the best of the situation, and hope to go through in safety. Many a strong ship lies at the bottom of the sea, where she was sent by just such a storm as we are about to pass through, and many another has barely escaped. I was once on a ship in the China seas, when the captain told the passengers that it would be a miracle if we remained half an hour longer afloat. But hardly had he done speaking when the wind fell, the storm abated, and we were safe. The typhoon is to these waters what the hurricane is to the West Indies; it is liable to blow at any time between April and September, and is often fearfully destructive. OPIUM-PIPE. OPIUM-PIPE. "Surely your ladyship knows Dr. Bruce!" Hetty said with a vivid splash of colour on either cheek "A little time ago I understood that Dr. Bruce----" "I require that everywhere a strict investigation shall take place into the conduct of the soldiers with regard to the life and property of the civilian population. "Where were they buried?" They all pressed forward. "Count out. That's the only fair way," shouted the boys in the center. "Now, there's three loaves o' bread for the Sargint," said Harry, laying them down on a newspaper. "There's three for the Corpril; there's three for me; there's three for you." "'T?un't peas, thick 'un," Vennal would break in uproariously, "it's turnips—each of 'em got a root like my fist." At this moment of perplexity, some medicine, that she had obtained from Edith, occurred to her, and, with a feeling of confidence, and almost of extacy, she took a phial from a shelf in a cupboard where she had placed it, and, pouring out the contents in a large spoon, hesitated an instant ere she administered it. "Let me see," said she; "surely it was a large spoonful Edith told me to give—yet all that was in the phial doesn't fill the spoon. Surely I can't be wrong: no—I remember she said a large spoonful, and we didn't talk of any thing else—so I must be right." But Mary still hesitated, till, hearing a sudden noise in the court-yard, which, she conjectured, was her mistress returned, and as the child was getting worse every moment, she leaned back its head, and, forcing open its mouth, compelled the patient, though with difficulty, to swallow its death. The draught was taken; the rigid muscles relaxed, and for a minute the child lay motionless in her lap; but in an instant after, Mary could scarcely suppress a shriek at the horrid sight that met her gaze. The eyes opened, and glared, and seemed as if starting from the head—the fair face and the red lips, were blue, deepening and deepening, till settling in blackness—the limbs contracted—the mouth opened, and displayed a tongue discoloured and swollen—then came a writhing and heaving of the body, and a low, agonized moan: and, as Mary looked almost frantic at this dreadful sight, Edith's words, when she had given her the phial, "that there was enough there to kill," suddenly occurred to her—and then, too, came, with a dreadful distinctness, the remembrance of the true directions which Edith had given. It was nearly noon the next day, when the under-sheriff entered the room to ask if their opinions were yet unanimous. The galleyman still refused. "That for ye, coward," said Tyler, striking him with the flat side of his bared weapon. Oakley aimed another thrust which was again turned aside, and the smith, now flinging down his sword, seized upon his right hand and wrenched the dagger from its grasp. After a short struggle, Oakley fell heavily on the pavement with the blood streaming from his mouth and nostrils. HoME萝拉泷泽第4部资源
ENTER NUMBET 0016www.hsrjapps.com.cn hbcakl.com.cn kdrybber.com.cn hkaco168.com.cn www.nfchain.com.cn www.sylmgjdl.org.cn www.nqyusu.com.cn sifanxi.com.cn www.ndchain.com.cn www.txyu.com.cn
Thought about taping down the sensors on the top and restarting. Just wanted some input before I try that.
Comment