Copytechnet.com - Konica Minolta
/
enThu, 02 Oct 2025 14:00:44 GMTvBulletin60/images/misc/rss.pngCopytechnet.com - Konica Minolta
/
C3070 PF-707m Skew From All Trays
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634831-c3070-pf-707m-skew-from-all-trays
Thu, 02 Oct 2025 09:00:34 GMTHi everyone,
Bit of a weird (at least to me) issue. I installed the machine a month ago. Did the auto centering adjustments for all trays (2 x...
Bit of a weird (at least to me) issue. I installed the machine a month ago. Did the auto centering adjustments for all trays (2 x main body + 3 x PF-707m), got good values within spec ([-200, +200], actually pretty close to 0). Machine was printing fine with consistent, near perfect front and front to back registration (after also doing the both sides adj. manually).
Then out of nowhere, I started getting significant skew from Tray 5 where I keep my 13x19" 350 gsm coated stock (see attached pdf). Note that absolutely nothing had been changed since the day before, where the machine was working just fine. I tried re-doing the auto centering adj. for Tray 5. I do not remember the original value for this tray (but say it was something like -30 or something like that), after doing the adjustment with the paper I had in the tray I got +500 (way out of spec).
I took out the centering sensor in the ADU just before the 2nd transfer roller and cleaned it. It wasn't dirty but I cleaned it anyway. Re-run the adjustment 1-2 times, got values around +350 ±30 (better but still way off).
Then I did Tray 1 on the main body with 100 gsm uncoated A3 and while it did change from its original value of something along the lines of a ±30 to a -148 (did the adjustment twice and got a similar result), which is still within spec.
Then finally I tried the auto centering adj. on Tray 4 on the PF with 150 gsm 13x19", same type of coated stock as the stuff sitting in Tray 5. Went from a -17 to a -231 and I tried printing out a sheet and it was still skewed from leading edge to trailing edge.
I cleaned the centering sensor multiple times, inspecting the paper path from the PF to the ADU for any pieces of paper or any other debris but couldnt find any.
The manual points out that at this point there is something wrong with the way the PF is installed to the main body (height, tilt of the unit). I loosened the 6 screws that hold the PF to the brackets on the main body and there wasn't any sort of movement of the unit.
This doesn't make any sense to me at this point, but I don't have anything else to try right now, so I was hoping while I'm dissasemblying and reassembling everything someone would come up with perhaps a somewhat brighter suggestion on what to try next ]]>Konica Minoltaorestesp/forum/technical-forums/copier-technical-discussion/konica-minolta/1634831-c3070-pf-707m-skew-from-all-traysMiscellaneous250i needs restarting every morning for scan to email to work
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634829-250i-needs-restarting-every-morning-for-scan-to-email-to-work
Thu, 02 Oct 2025 08:42:54 GMTHey chaps, I have a 250i out in the field on s7 firmware and the customer has to reboot the machine every morning to get scan to email working again....Konica Minoltadoinbox/forum/technical-forums/copier-technical-discussion/konica-minolta/1634829-250i-needs-restarting-every-morning-for-scan-to-email-to-workJammingJ3102
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634765-j3102
Wed, 01 Oct 2025 18:56:32 GMTGood evening, I need your advice. I have a problem on a Konica Minolta C4080 machine: jam code J3102M, but there is no paper jam. I checked PS22, I...Good evening, I need your advice. I have a problem on a Konica Minolta C4080 machine: jam code J3102M, but there is no paper jam. I checked PS22, I replaced PS22, but the same problem remains. The issue is only resolved when I replace the fusing unit.Konica Minoltalox ay/forum/technical-forums/copier-technical-discussion/konica-minolta/1634765-j3102Konica Minolta Bizhub C451i Firmware
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634749-konica-minolta-bizhub-c451i-firmware
Wed, 01 Oct 2025 16:31:13 GMTOur copier cannot use OAuth.
Is it possible with a firmware upgrade?
Looking for F000-GGA-Q6 or if anyone knows what works.
Thanks :)
Is it possible with a firmware upgrade?
Looking for F000-GGA-Q6 or if anyone knows what works.
Thanks ]]>Konica Minoltamjensen/forum/technical-forums/copier-technical-discussion/konica-minolta/1634749-konica-minolta-bizhub-c451i-firmwareMisfeed detected with no jam code display.
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634712-misfeed-detected-with-no-jam-code-display
Wed, 01 Oct 2025 11:10:40 GMTHello,
I am experiencing a “misfeed detected” issue on my Bizhub 450i, but no paper jam code is displayed. Before the misfeed detected error...
I am experiencing a “misfeed detected” issue on my Bizhub 450i, but no paper jam code is displayed. Before the misfeed detected error occurs, the machine stays in warming up mode for about 5 minutes. Has anyone encountered this issue? Please help me!
]]>Konica MinoltaThinh Le/forum/technical-forums/copier-technical-discussion/konica-minolta/1634712-misfeed-detected-with-no-jam-code-displayGenerating a code to reset the service code for the c224e machine
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634708-generating-a-code-to-reset-the-service-code-for-the-c224e-machine
Wed, 01 Oct 2025 10:24:49 GMTI am having trouble entering service mode on a bizhub c224e machine located in a Polish school in Vienna. I am, of course, working here on a...
The previous service technician changed the password. Now, after replacing the transerband, I would like to reset its counter, but I cannot enter service mode with the code 9272....
Machine data:
Serial number: A5C4022199674
MAC: 00:20:6B:SA:31:EF
PW Reset Request Code:
VQZSD-VSYXM-YX6DB-WEARJ-PDKMN-9G8YD-ENJQH-EZDJB
Could you please help me and generate a Reset Code for this machine?
Thank you in advance for your help on behalf of myself and the parents' council that owns this copier.
RZKuli]]>Konica MinoltaRZKuli/forum/technical-forums/copier-technical-discussion/konica-minolta/1634708-generating-a-code-to-reset-the-service-code-for-the-c224e-machineFW, BH-4050, SMB2
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634682-fw-bh-4050-smb2
Wed, 01 Oct 2025 04:26:36 GMTCustomer has a BH-4050 with
ROM-Version Controller A6F730G0902-W99 and
Boot-ROM-Version A6F799G0100-999
Got from a friendly colleague here:...
ROM-Version Controller A6F730G0902-W99 and
Boot-ROM-Version A6F799G0100-999
Got from a friendly colleague here:
contMainUpdaterA6F730GCA00-W51
contSubUpdaterA6F730G0A00-899
(thanks!)
As far as I understood the - in my eyes VERY misty firmware issues with these series, I would love to know before making boat anchors, if this latest and greatest FW would be suitable for the mentioned machine to make it SMB2 suitable.
The problem is that the machine is in a medical complex where a hundred patients are depending on it daily, and a crash would be catastrophic.
I cannot have easily a backup machine ready in case of an emergency, because it should have 4 cassettes, a fax option, and it needs a very complicated set up via the IT folks besides the already problematic SMB scanning issue. (sigh.....)
The other problem is that I have with these series limited experience regarding firmware. My main field are the A3-color machines.
Any help please?
Hans]]>Konica MinoltaHansoon/forum/technical-forums/copier-technical-discussion/konica-minolta/1634682-fw-bh-4050-smb2MiscellaneousC558 shifted image
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634576-c558-shifted-image
Tue, 30 Sep 2025 10:59:33 GMT
I've got more problems with c558 that I'm servicing. Client was using 250gsm loaded to tray 3 (he would use mnual tray but it prints skewed, i still dont know why). One side came out great, but the other started to "flow" as we like to call it. That "flowing" was totally random. After cleaning everything, I tried to change loop settings because that was the only thing I could think of; it changed nothing. Then I changed to tray 2, and to my surprise, it came out great, but after a few hundred pages, it came back. I don't know what to do with it apart from maybe changing transport rollers or regist unit . Copier has less than 200k clicks.]]>Konica MinoltaStaziakow/forum/technical-forums/copier-technical-discussion/konica-minolta/1634576-c558-shifted-imageKonica minolta c452 error c-dc00 and c-dc30
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634399-konica-minolta-c452-error-c-dc00-and-c-dc30
Sun, 28 Sep 2025 21:11:28 GMTHello fellow techinician,
When i turn on the copier it immediately shows code c-dc00 and after that you can clear the code and the copier will turn...
When i turn on the copier it immediately shows code c-dc00 and after that you can clear the code and the copier will turn into ready to copy mode. But with first print or copy it shows c-dc30.
I have changed these parts but nothing happens.
MFP board
NVRAM
Echo board
All four image units.
Prcb board
Power supply board.
Not even single difference. Any idea? What could be wrong.
And one interesting fact.
When you open all the doors and clears all units and turn the machine it still shows c-dc00 code.
Any ideas guys?]]>Konica Minoltamindhunter/forum/technical-forums/copier-technical-discussion/konica-minolta/1634399-konica-minolta-c452-error-c-dc00-and-c-dc30Biz 4752 compatibility with Mac
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634295-biz-4752-compatibility-with-mac
Fri, 26 Sep 2025 20:58:30 GMT
Have a customer with small office and 2 desktop Mac's. OS 14.1.1 & OS 13.12.7.6.
Can a Biz 4752 work with their Mac's for printing and more important scanning?
I've asked a few computer people I know and they said printing should not be a problem but couldn't give a definitive answer about scanning.
Thanks in advance]]>Konica Minoltacopyman/forum/technical-forums/copier-technical-discussion/konica-minolta/1634295-biz-4752-compatibility-with-macC3320i storage lock
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634278-c3320i-storage-lock
Fri, 26 Sep 2025 17:45:39 GMTsup guys, right now got 2 machines with the same problems c3320i(problem with microsd) and BH4050i (problem with ssd and changed for microsd) after...
if some1 could help i apriciate
storage lock.jpg]]>Konica MinoltaTiagocang/forum/technical-forums/copier-technical-discussion/konica-minolta/1634278-c3320i-storage-lockDv512 help
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634250-dv512-help
Fri, 26 Sep 2025 14:57:59 GMTGuys, I need your opinions on this one. Is this a genuine developer or not? I looked online and i ve got mixed results thxGuys, I need your opinions on this one. Is this a genuine developer or not? I looked online and i ve got mixed results thxKonica MinoltaMohamed Mesbah/forum/technical-forums/copier-technical-discussion/konica-minolta/1634250-dv512-helpKonicaMinolta bizhub C650i
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634243-konicaminolta-bizhub-c650i
Fri, 26 Sep 2025 14:22:20 GMTHello everyone,
an someone help me with this problem... KonicaMinolta bizhub c650i and I have a problem with the cyan background. I changed DR-618C,...
an someone help me with this problem... KonicaMinolta bizhub c650i and I have a problem with the cyan background. I changed DR-618C, DV-612C, image transfer unit but it didn't solve the problem. If anyone has any ideas I would be grateful.]]>Konica Minoltaalmir03/forum/technical-forums/copier-technical-discussion/konica-minolta/1634243-konicaminolta-bizhub-c650ibizhub C360i (DF-714 not feeding)
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634173-bizhub-c360i-df-714-not-feeding
Fri, 26 Sep 2025 01:06:04 GMTKonica Minolta bizhub C360i - DF-714 dual scan feeder not feeding. Trying to get to the (AAYHPP1100) Guide Film but the service manual is not clear...
disassemble feeder to check if guide film is damaged and preventing feeding. Any suggestions greatly appreciated.
]]>Konica Minoltazunamiwave/forum/technical-forums/copier-technical-discussion/konica-minolta/1634173-bizhub-c360i-df-714-not-feedingC450i print rubbing off
/forum/technical-forums/copier-technical-discussion/konica-minolta/1634032-c450i-print-rubbing-off
Thu, 25 Sep 2025 02:10:07 GMTKonica Minoltacopyman/forum/technical-forums/copier-technical-discussion/konica-minolta/1634032-c450i-print-rubbing-off
A favorite resort of the foreign residents of Yokohama during the summer months is the island of Enoshima. It is about twenty miles away, and is a noted place of pilgrimage for the Japanese, on account of certain shrines that are reputed to have a sacred character. Doctor Bronson arranged that his party should pay a visit to this island, as it was an interesting spot, and they could have a glimpse of Japanese life in the rural districts, and among the fishermen of the coast. "But as we are in for it," he continued, "we must make the best of the situation, and hope to go through in safety. Many a strong ship lies at the bottom of the sea, where she was sent by just such a storm as we are about to pass through, and many another has barely escaped. I was once on a ship in the China seas, when the captain told the passengers that it would be a miracle if we remained half an hour longer afloat. But hardly had he done speaking when the wind fell, the storm abated, and we were safe. The typhoon is to these waters what the hurricane is to the West Indies; it is liable to blow at any time between April and September, and is often fearfully destructive. OPIUM-PIPE. OPIUM-PIPE. "Surely your ladyship knows Dr. Bruce!" Hetty said with a vivid splash of colour on either cheek "A little time ago I understood that Dr. Bruce----" "I require that everywhere a strict investigation shall take place into the conduct of the soldiers with regard to the life and property of the civilian population. "Where were they buried?" They all pressed forward. "Count out. That's the only fair way," shouted the boys in the center. "Now, there's three loaves o' bread for the Sargint," said Harry, laying them down on a newspaper. "There's three for the Corpril; there's three for me; there's three for you." "'T?un't peas, thick 'un," Vennal would break in uproariously, "it's turnips—each of 'em got a root like my fist." At this moment of perplexity, some medicine, that she had obtained from Edith, occurred to her, and, with a feeling of confidence, and almost of extacy, she took a phial from a shelf in a cupboard where she had placed it, and, pouring out the contents in a large spoon, hesitated an instant ere she administered it. "Let me see," said she; "surely it was a large spoonful Edith told me to give—yet all that was in the phial doesn't fill the spoon. Surely I can't be wrong: no—I remember she said a large spoonful, and we didn't talk of any thing else—so I must be right." But Mary still hesitated, till, hearing a sudden noise in the court-yard, which, she conjectured, was her mistress returned, and as the child was getting worse every moment, she leaned back its head, and, forcing open its mouth, compelled the patient, though with difficulty, to swallow its death. The draught was taken; the rigid muscles relaxed, and for a minute the child lay motionless in her lap; but in an instant after, Mary could scarcely suppress a shriek at the horrid sight that met her gaze. The eyes opened, and glared, and seemed as if starting from the head—the fair face and the red lips, were blue, deepening and deepening, till settling in blackness—the limbs contracted—the mouth opened, and displayed a tongue discoloured and swollen—then came a writhing and heaving of the body, and a low, agonized moan: and, as Mary looked almost frantic at this dreadful sight, Edith's words, when she had given her the phial, "that there was enough there to kill," suddenly occurred to her—and then, too, came, with a dreadful distinctness, the remembrance of the true directions which Edith had given. It was nearly noon the next day, when the under-sheriff entered the room to ask if their opinions were yet unanimous. The galleyman still refused. "That for ye, coward," said Tyler, striking him with the flat side of his bared weapon. Oakley aimed another thrust which was again turned aside, and the smith, now flinging down his sword, seized upon his right hand and wrenched the dagger from its grasp. After a short struggle, Oakley fell heavily on the pavement with the blood streaming from his mouth and nostrils. HoME萝拉泷泽第4部资源
ENTER NUMBET 0016fhchain.com.cn www.ijoclf.com.cn www.ipopay.com.cn rbcwmz.com.cn nwchain.com.cn shibotiyu.com.cn www.mskvt.com.cn sjylhs.com.cn upleif.com.cn www.eszxthe.com.cn